home *** CD-ROM | disk | FTP | other *** search
- Path: niamh.indigo.ie!usenet
- From: prospero@indigo.ie (L Mac Mullan)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Microway Flicker-Fixer
- Date: 22 Mar 96 21:21:28 +0000
- Organization: Indigo
- Message-ID: <929.6655T1281T1411@indigo.ie>
- NNTP-Posting-Host: dublin-ts2-67.indigo.ie
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP)
-
- I've just got one of these second hand (minus manual) and have some questions
- I hope some one out thre can answer :-) (apologies to any one who has seen
- this post twice, our ISP new feeds went "funny" last week, sigh)
-
- The card came from the states, so it is obviously set up for NTSC, and will
- only display a stable image for an NTSC screen mode. There are two jumpers on
- the board and I presume one of these sets a PAL mode, any idea which?
-
- In the same vein, the NTSC images are fairly solid, except for an occasinal
- "twitch", ie the screen seems to hop up about 1-2 scan lines and then back
- every so often. Again I notice there are two pots on the board (one accesible
- from the back plane. Am I right in thinking these adjust the scan rate?
-
- Finally, does anyone have a manual on the above that I could get a copy of?
-
- Thanks in advance
-
- L Mac Mullan (prospero@indigo.e)
- --
- Mary had a little lamb. The Doctor was surprised.
-
-